Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5862 visitantes online.
Productos
Información
Destacado
Inicio >> ONKYO >> TXSR502 Manual de Usuario
 
 0 artículo(s) en Su carrito 

ONKYO TXSR502
Manual de Usuario


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English, French, Spanish, Chinese Simplified, Chinese Traditional
Precio: $4.99

Descripción del ONKYO TXSR502 Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como archivo PDF después de que lo compre.

El Manual del Propietario (a veces llamado Manual del Usuario o Guía del Usuario) contiene información sobre cómo utilizar su dispositivo. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English, French, Spanish, Chinese Simplified, Chinese Traditional

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
TX-SR502_En.book Page 48 Friday, March 12, 2004 1:05 PM

Advanced Setup
Crossover Frequency

Advanced setup cannot be set while headphones are connected, Speaker B is on, or the multi channel input is being used.

4

To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your subwoofer and other speakers (front, center, and surround).

Press the [SETUP] button. Setup closes.

1

AMP

Press the [AMP] button followed by the [SETUP] button on the remote controller.

Note: � For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. In addition, listen to some music that you know well and choose a higher crossover frequency if you think there�s not enough sound coming from the subwoofer; a lower setting if you think there�s too much.

2
ENTER

Use the Up and Down [ ]/[ ] buttons to select �1. SP Con�g,� and then press the [ENTER] button.

Speaker Distance
To get the best from surround sound, it�s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the distance from each speaker to the listening position.

ENTER

1
Use the Down [ ] button to select �Crossover,� and then use the Left and Right [ ]/[ ] buttons to select a crossover frequency. Choose a crossover frequency suitable for your setup. If you�re using a subwoofer, choose a crossover frequency based on the diameter of your front speakers. If you�re not using a subwoofer, use the diameter of the �rst speaker that you speci�ed as Small in steps 4 through 7 in the �Speaker con�guration� setting.
Speaker cone diameter Over 8 in. (20 cm) 6-1/2 to 8 in. (16�20 cm) 5-1/4 to 6-1/2 in. (13�16 cm) 3-1/2 to 5-1/4 in. (9�13 cm) Under 3-1/2 in. (9 cm) Crossover frequency 60Hz 80Hz
DISPLAY

Measure and make a note of the distance from each speaker to the listening position.
AMP

3
ENTER

2

Press the [AMP] button followed by the [SETUP] button on the remote controller.

ENTER

3
ENTER

Use the Up and Down [ ]/[ ] buttons to select �2. SP Distance,� and then press the [ENTER] button.

ENTER

4

Use the [DISPLAY] button to switch ft or m. ft: distances in feet. Can be set from 1 to 30 feet in 1-foot steps. m: distances in meters. Can be set from 0.3 to 9 meters in 0.3-meter steps.

100Hz (default) 120Hz 150Hz

48

Quizás también quiera comprar

$4.99

TXSR502 ONKYO
Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo genera…
>
Parse Time: 0.276 - Number of Queries: 102 - Query Time: 0.098